brown774 Report post Posted June 27, 2018 We have the 4 door nor cold with ice maker. I changed the ice maker but now the tray does not fill with water. I have water to the fill valve, the wire plug only goes in the mark one way. I could not find any fuse or circuit break near the fill valve. I moved the on off bar from old maker to new one and it stays up in the off position and down in on. So wondering if the next step is the fill valve. It appeared to fill the old maker prior to install of the new one. Thanks Share this post Link to post Share on other sites
desertdeals69 Report post Posted June 27, 2018 is there power to the plug or the fill valve? Share this post Link to post Share on other sites
hermanmullins Report post Posted June 27, 2018 Brown, open the outside access panel for the refrigerator. That is where you will find the ice maker valve. Make sure it is plugged in. Put in the new unit, you may have unplugged it. Herman Share this post Link to post Share on other sites
