jawopw Report post Posted November 7, 2018 I have a 2004 travel supreme and the air, fuel, temperature gauges start windshield wiping along with the red warning lights while driving and hitting bumps but will restore to normal function if I het the gauge with my hand or end up on smooth road. Any suggestions on how to fix this. It almost appears to bee a loose connection or wire Share this post Link to post Share on other sites
hermanmullins Report post Posted November 7, 2018 jawopw, My best guess would be to check for a loose connection. A loose ground would be my first place to check. Herman Share this post Link to post Share on other sites
richard5933 Report post Posted November 7, 2018 Some of the gauge clusters have the 'wiring' done by using a printed circuit board, but the board is nothing more than a flexible piece of Mylar or thin plastic. I had similar problems on a vehicle once when the point where the harness plugged into the Mylar circuit board had worked loose. There wasn't much back there to hold things together, so it was easy to see how it had come loose. And what Herman said - check all the harness connectors in the area and all the ground connections. Share this post Link to post Share on other sites
