hhornig Report post Posted April 22, 2010 My Duo-Therm Comfort Control Center requires pushing the buttons several times to get it to change modes and it is getting worse. I understand there was an article in the FMCA magazine several years ago on how to repair these beasts. How do I find that article? Share this post Link to post Share on other sites
tbutler Report post Posted April 23, 2010 I have looked back through 2009 which is the earliest on file here on the web. I did not find any article on this subject. I also tried a web search with no relevant results. I found the Duo-Therm manual on line but beyond wiping off the unit, they have no other maintenance suggestions. I'm still looking... Share this post Link to post Share on other sites
hhornig Report post Posted April 23, 2010 I understand the article was in July or August of 2007. Is it possible to search back that far on line? Share this post Link to post Share on other sites
edjfeb Report post Posted November 3, 2012 I recently upgraded my control and boards in the units themselves. Still sorting out the data connect issues, may have to take it to a dealer. Anybody have information on switch settings or data connectivity between the control units and air conditioner 1 and 2? Share this post Link to post Share on other sites
pastorphil Report post Posted November 4, 2012 I have to install paper work that came with the coach (2005), it has the pin switch settings. If you want me to email that to you, I will be glad to. My email address is prness@yahoo.com. Share this post Link to post Share on other sites
dickandlois Report post Posted November 16, 2012 I found this information and just posted it on another thread. It might help. http://bryantrv.com/docs2/docs/ccc.pdf Rich. Share this post Link to post Share on other sites
donbowen Report post Posted November 16, 2012 Subj: Inquiry of 4 Button Thermostat DON --- --- Here is my canned reply to an inquiry I refurbish DuoTherm 4 Button thermostats - part #310 6463.007, I have a very limited number available on an Exchange Basis. Give me your NAME - ADDRESS & PHONE NUMBER, tell me you are an honest person and I will send a refurbished, cleaned, sanitized & tested thermostat via Priority Mail --on the Honor System. You install, see it work then send me your check for $100.00 (plus $10.00 shipping) ALONG WITH THE OLD THERMOSTAT. That makes this a no risk, no down time transaction. I DO NOT SELL OUTRIGHT -- THIS MUST BE AN EXCHANGE SALE -- THERE IS A CORE CHARGE OF $100.00 IF YOU DO NOT SEND ME THE OLD THERMOSTAT. A return postage paid USPS shipping label will be enclosed for your convenience and you can re-use the box. TWO provisions - THE DISPLAY ON THE EXCHANGE THERMOSTAT MUST WORK and I NEED THE OLD THERMOSTAT RETURNED WITHIN 7 DAYS. If your LCD Display IS DEAD, CONSIDER GOING TO THE CURRENT 5 BUTTON SYSTEM FOR $200.00 - (ONE AIRCOND) - WITH INSTRUCTIONS. PLEASE NOTE --- IF YOUR PROBLEM IS -- If FURNACE does not show on the display - that is a furnace problem and another thermostat will not fix that. If you have 2 or 3 air cond and you cant change zones AND a zone number will not appear on the display, that is a connection problem with the communications cable and another thermostat will not fix that until you correct the communination cable problem. From time to time I have other thermostats and upper boards available. Let me know. William Hendrix , 370 Baker Lane Erie, CO 80516 303 809 6006 Share this post Link to post Share on other sites
jimary Report post Posted April 3, 2013 I got one of Williams refurbished thermostats and am very happy with it. Looks and works like new. Share this post Link to post Share on other sites