Balmer1962 Report post Posted September 29 My HWH hydraulic jacks will not retract. RV is in my yard. Need help how to fix or someone in southern Michigan that is a mobile service. Any help would be appreciated. Share this post Link to post Share on other sites
aztec7fan Report post Posted September 30 what year, make,model of coach, and what model of jacks? Share this post Link to post Share on other sites
rayin Report post Posted October 2 (edited) On the end of each solenoid is a manual valve opening, it will either be a T-handle, hex nut, or plastic flip lever. Regardless of type, open it 4 turns or flip the handle 90° to open the valves of the 4 solenoids. The springs will retract the jacks, then close the valves to snug or flip the lever back to the original position. If you have jacks with no springs, use a pry bar to push the jacks to fully-retracted then close valves. As to service, determine your model# leveling system, then follow the troubleshooting section directions in the service manual. You'll find the service manual by googling your model# and service manual. Edited October 2 by rayin Share this post Link to post Share on other sites
