hermanmullins Report post Posted September 26, 2010 I had to replace both chassis batteries that were less then 1 year old. At the same time, I replaced all four of my six-volt batteries. At this time I had a bright idea. I got BRASS flat washers and BRASS wing nuts. I took all connections off and cleaned the lugs with a "Flap Wheel" in my drill (I made sure there was no corrosion anywhere). I put on a Brass Flat Washer, then the cleaned Lug, then another Brass Flat Washer and then the Brass Wing nut on. I did this on all battery connections. I then sprayed the terminals with some protected I got at the autoparts store. Since that time (2 years ago) I have not had to put in any water in any of the batteries and they stay fully charged. I just wanted to pass this on to anyone that might be interested. (Please don't hate me if I missed spelled some words.) Share this post Link to post Share on other sites
DeltaDonnie Report post Posted September 26, 2010 Great post thanks for the tip, by the way I didn't see any mis-spelled words. For your info there is an ABC spell check button for your use next time. Button located to the right says ABC Share this post Link to post Share on other sites
