Mathetes Report post Posted February 19, 2013 Have a 2003 Travel Supreme 40' 400 Cummins. I needed to take the chassis batteries out and when I put them back in, I did it backwards. Bad mistake - but now the coach will not start. I did have the switch off @ the engine. Everything else chassis related seems to work fine, but won't start. Where do I need to look? It seems to be the starter, but not sure. Perhaps someone knows where a fuse might be that I blew or maybe it is more serious. Need some direction. Share this post Link to post Share on other sites
wolfe10 Report post Posted February 19, 2013 I would start by calling Cummins. Cummins 800 343-7357 Does the Allison shift pad illuminate with the key on? If not, call Allison as well. Allison help line 800 252 5283 Share this post Link to post Share on other sites
Mathetes Report post Posted February 19, 2013 Thanks, I will do that, yes the allison shift pad does illuminate Share this post Link to post Share on other sites
Mathetes Report post Posted February 19, 2013 It was five blown fuses which I found in the power bay. I was advised to look in the power bay for a fuse box. I did and thankfully it was a easy fix. Thanks for the advise. Share this post Link to post Share on other sites
wolfe10 Report post Posted February 19, 2013 Glad it was an inexpensive fix. Share this post Link to post Share on other sites
five Report post Posted February 21, 2013 It was five blown fuses which I found in the power bay. I was advised to look in the power bay for a fuse box. I did and thankfully it was a easy fix. Thanks for the advise. I have fuses/breakers located in four different basement bays. I took a picture of each, and made a drawing of each, with every fuse labeled in the drawings. Share this post Link to post Share on other sites