cowboy66 Report post Posted March 5, 2014 Can some one tell me how to remove the lens on the 6 docking lights to replace the bulb on the back of the Dynaquest MH. Share this post Link to post Share on other sites
hermanmullins Report post Posted March 5, 2014 Cowboy, If there are no screws then they are clip in lenses. Try to gently insert a flat blade screw driver in one end and very gently try to push the edge of the lens out. Be careful with the pressure. Herman Share this post Link to post Share on other sites
cowboy66 Report post Posted March 6, 2014 Herman They have a chrome ring around the lenses holding it on. I think it may unscrew but don't want to scratch the paint undoing it if I an wrong. Share this post Link to post Share on other sites
hermanmullins Report post Posted March 6, 2014 cowboy, Are saying that the chrome rings are painted to the coach or that you are afraid you might slip and scratch the paint? If painted, take a razor blade and cut all around the ring before trying to remove it. If you are afraid of slipping put duct tape around the ring before trying to loosen the screws. Herman Share this post Link to post Share on other sites
cowboy66 Report post Posted March 8, 2014 Herman Looks like they come out from the back and they are all undercoated in so will just leave it for now. Will just stay away from backing in the dark. Thanks Share this post Link to post Share on other sites
