fzeuner Report post Posted February 8, 2015 I'm looking for some help installing a Brake Controller in a 2012 Expedition. Has anyone accomplished this? I found the Chassis PDM with the relays and fusing for the brake turn and marker lights. Under the center Dash I found the fusing for the "trailer brakes", a 30 amp fuse is installed. Any help would be appreciated. Frank Share this post Link to post Share on other sites
jleamont Report post Posted February 25, 2015 Frank, check above the accelerator pedal, Ford has been installing a plug for a brake controller there for at least 10 years now, its a White square connector, In your glove box (Assuming you bought it new) is the other end that you will have to splice into the brake controller you purchase, wiring and instructions are usually in the bag with any relays and fuses you will need to complete the installation. If you still cannot locate it let me know. good luck. Share this post Link to post Share on other sites
dickandlois Report post Posted February 26, 2015 Joe, I think that Frank is referring to installing a brake controller on a Fleetwood Expedition on a Freightliner chassis? Rich. Share this post Link to post Share on other sites
jleamont Report post Posted March 3, 2015 Rich, I think you are correct. I went right past that one....didn't see it coming. Thanks. Share this post Link to post Share on other sites