hlc12349 Report post Posted July 25, 2015 I have Power Gear 500456 The front hydraulic jacks will not retract all the way up. started with front left then it started working good. then the right one want retract all the way.have cleaned them both and put silicone on them and greased the fitting. hope some one can help.. Share this post Link to post Share on other sites
five Report post Posted July 25, 2015 Have you checked the fluid level? Share this post Link to post Share on other sites
wildebill308 Report post Posted July 26, 2015 What year is your coach? Do they eventually come up? I would try cycling the jacks several times and see if that helps. There are people who have added extra springs to help with retraction. Bill Share this post Link to post Share on other sites
bchampton Report post Posted August 8, 2016 I have a Power Gear system on my 2008 Bounder. Mine are Elect. I do not know if they use the same Position Sensing system, but after a number of problems of not retracting, I found the LITTLE sensing Magnets had fallen out or broken. Repaired and RESET the system, all is well again. Bill Share this post Link to post Share on other sites
