DJTNANG Report post Posted August 15, 2016 I have a 2004 Winnebago Vectra, when I let the air out of the air bags and the coach settles down, the right wheels have about 1 inch of clearance from the fiberglass on the coach. the Left wheels actually make contact with the fiberglass. Is this normal? Don Johnson Share this post Link to post Share on other sites
wolfe10 Report post Posted August 15, 2016 Don, The body is not really the place to measure. Chassis dimensions are what is critical. If this is a side to side issue, may be nothing more than a panhard rod adjustment. Share this post Link to post Share on other sites
DJTNANG Report post Posted August 15, 2016 Thanks Brett, when the air bags are inflated everything looks normal with even spacing. Newbie and just trying to learn... DJ Share this post Link to post Share on other sites
wolfe10 Report post Posted August 15, 2016 Really only matters at proper RIDE HEIGHT. By definition, a panhard rod/track bar will allow the body to shift as it deviates from proper ride height (moves in an "arc". A panhard rod/track bar attaches to the chassis on one side of the chassis and the axle on the other. It limits side to side motion between chassis and axle, while allowing full vertical motion. But the chassis will describe a small "arc" as vertical movement occurs. Watts links are more complex, used on race cars, etc to replace panhard rods. They allow ONLY vertical movement, no "arc". Share this post Link to post Share on other sites
