deanbam03flyrnes
Members-
Content Count
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Everything posted by deanbam03flyrnes
-
2021 Jeep Grand Cherokee
deanbam03flyrnes replied to ralpht52's topic in Toads-Towed Behind Motorhome
-
I don't know where you would get the white film but I would definitely recommend something. Maybe a bra. There are several companies out there. You need something. Good Sam insurance rejected my claim for damage caused by newly chip-sealed roads declaring it to be "normal wear and tear"!!! I definitely don't recommend Good Sam insurance! Dean Barnes
-
No Heat Atwood Furnace
deanbam03flyrnes replied to deanbam03flyrnes's topic in Systems and Appliances
I talked with Atwood rep on the phone and he guided me thru some test steps. -
I have a 1999 Tradewinds and the front furnace doesn't ignite. I have determined the fault is a bad circuit board. There are after-market boards made by Dinosaur Electronics. Are they a viable option?
-
US Gear Toad Braking System
deanbam03flyrnes replied to DreamBelievers's topic in Toads-Towed Behind Motorhome
I have used the US Gear system since 2001. I had it on my 1999 Chevy Blazer until 2009 when I transferred it to my new Saturn Vue. It has never failed me and it is easy to use. -
Towing 2009 Saturn Vue FWD
deanbam03flyrnes replied to jokaren3's topic in Toads-Towed Behind Motorhome
The towing limits are as Brett says. However you should review the owner's manual for the towing requirements. It specifies that you should remove a specific fuse in order to prevent running down the battery. Also, if the dealer that sold the car origionaly added an after-market alarm you may have to disable the alarm while towing. This is to prevent the horn from honking while you are towing. I discovered this the hard way. Dean Barnes -
Spartan said to contact the coach builder as this is a modification to the chassis. This is a Harney Renegade and it is on a Spartan chassis. It is NOT on the magnum chassis.
-
1999 Renegade on Spartan chassis has no air dump to lower chassis while parked. Has anyone added an air dump capability, and if so, what was required?
-
Reading the installation manual for the Demco base plate, it appears that after the base plate is installed the plastic front-end parts (grill/fascia/bumper) are pushed forward of their original position. Does anyone have experience with the Demco installation on a 2008/2009 Vue?