Jump to content

Mel148

Members
  • Content Count

    6
  • Joined

  • Last visited

Everything posted by Mel148

  1. Sorry Bruce I didn't see the previous replies .My next question was to check the element.On mine you have to pull the HW tank to be able to replace it.
  2. Bruce I didn't my hot water was working just fine.I went to several seminars though and learned a lot about my Spartan chassis. Did you check the mini 2 amp fuse on the circuit board by the burner.On my coach the back of the hot water tank is accessed under the floor in the closet. Mine had a 110 volt inline connector If yours has that you might check you are getting voltage to and through that to the heating element.
  3. I de winiterized my coach this past week and replaced the 2 amp mini fuse on the water heater board outside although I don't think it was blown.Un plugged some connections and turned the 120 v circuit breaker on and off in the main fuse panel and it started to work again .Not sure what was wrong maybe a loose connection or some got bumped when replacing the turbo but all seems good now. So now we are getting it ready for the rally in Perry a week from now.Looking forward to it. Thanks Joe & Darlene 2010 Fleetwood Discovery 40 G
  4. Thanks for the info I think you are referring to the black junction box on the rear of the tank under my closet floor The temp dropped and I went ahead and winterized the coach so I will have to check it when I de winterize it early next year I will post the results then Joe
  5. Yes I have a 2010 discovery 40g with a Atwood ge16ext 10 gal after getting it out of Cummins repair for a turbo replacement now the electric side is not heating the water but the propane side works fine I am getting 110 voltage to the back of the heater but the red indicator light at the switch in the control board up front barely lights up for just a second when I flip it on is there a fuse under the black junction box at the rear of the water heater my manual isn't clear about this and I haven't tried to remove it because it's really tight or do I need to look elsewhere This is my first post and New to FMCA Thanks Joe
×
×
  • Create New...