Mel148

Sorry Bruce I didn't see the previous replies .My next question was to check the element.On mine you have to pull the HW tank to be able to replace it.

Bruce I didn't my hot water was working just fine.I went to several seminars though and learned a lot about my Spartan chassis. Did you check the mini 2 amp fuse on the circuit board by the burner.On my coach the back of the hot water tank is accessed under the floor in the closet. Mine had a 110 volt inline connector If yours has that you might check you are getting voltage to and through that to the heating element.

Was planing on doing that among other things Joe

I de winiterized my coach this past week and replaced the 2 amp mini fuse on the water heater board outside although I don't think it was blown.Un plugged some connections and turned the 120 v circuit breaker on and off in the main fuse panel and it started to work again .Not sure what was wrong maybe a loose connection or some got bumped when replacing the turbo but all seems good now. So now we are getting it ready for the rally in Perry a week from now.Looking forward to it. Thanks Joe & Darlene 2010 Fleetwood Discovery 40 G

Thanks for the info I think you are referring to the black junction box on the rear of the tank under my closet floor The temp dropped and I went ahead and winterized the coach so I will have to check it when I de winterize it early next year I will post the results then Joe

Yes I have a 2010 discovery 40g with a Atwood ge16ext 10 gal after getting it out of Cummins repair for a turbo replacement now the electric side is not heating the water but the propane side works fine I am getting 110 voltage to the back of the heater but the red indicator light at the switch in the control board up front barely lights up for just a second when I flip it on is there a fuse under the black junction box at the rear of the water heater my manual isn't clear about this and I haven't tried to remove it because it's really tight or do I need to look elsewhere This is my first post and New to FMCA Thanks Joe