JohnFcasni Report post Posted February 20, 2017 Brand New 2017 Winnebago Forza 34T. Freightliner Chassis with Allison 2100MH transmission. Occasionally when shifting the Service Light on the pad flashes and I cannot shift. I have reset with the codes, but still a mystery as to why it would come on in the first place? Any thoughts/Help? Thanks Share this post Link to post Share on other sites
jimnorm Report post Posted February 20, 2017 Call Freightliner and/or Allison You don't want to keep using it and screw it up. Share this post Link to post Share on other sites
Corona4me Report post Posted February 20, 2017 Did you get a CODE off the Gear selector pad? Share this post Link to post Share on other sites
manholt Report post Posted February 21, 2017 John. Welcome to the forum! Your on Warranty. If your close to your dealer, take it there if they have service bays. Call Manufacturer with your VIN# handy and ask for Tech Department or call Allison! Carl Share this post Link to post Share on other sites
JohnFcasni Report post Posted February 21, 2017 Freightliner says you need to shift from R to N and then D. You cannot go from R to D or D to R without passing through N. Share this post Link to post Share on other sites
wolfe10 Report post Posted February 21, 2017 20 minutes ago, JohnFcasni said: Freightliner says you need to shift from R to N and then D. You cannot go from R to D or D to R without passing through N. That is a good recommendation, but one CAN shift directly. Just not as easy on the transmission. Share this post Link to post Share on other sites
JohnFcasni Report post Posted February 21, 2017 Hmmmmm. Thanks. Will be back on the phone tomorrow. Share this post Link to post Share on other sites
manholt Report post Posted February 21, 2017 John, your 34T is the only model of 3 Forza's that has the Allison 2100, the other 2 has the 2500 and all 3 has a 340hp Cummins. Other than your 2100 everything is the same. Yes, you have the best floorplan! I don't know why WB does what it does! But if Allison say's to go to N before D or R, that's what I would do! Sorry Brett, but as long as he is under warranty with Allison, that's all I can recommend! Carl Share this post Link to post Share on other sites
