lemeulc Report post Posted April 29, 2017 I have a 2000 Pace Arrow with the V10 6.8l engine matched to their standard auto transmission At operating temperature and idling on an upgrade, when I accelerate the transmission slips momentarily before it catches. I don't notice any other problems with shifting or other normal driving. My local technician has indicated that the speed sensors are OK. The fluid level is normal. The only other indication of an issue is that the light on the end of the gearshift blinks when I back into the garage. It does not blink in "drive". I would appreciate and sound advice on resolving this issue. Share this post Link to post Share on other sites
campcop Report post Posted May 1, 2017 What color is the trans fluid? When was it changed last? Share this post Link to post Share on other sites
smitty777 Report post Posted May 20, 2017 If not too late on this one. This can sometimes signal the start of the Torque Converter going out. This was a weak point on the 4spd transmissions. If it is going out, or does go out in the future, spec a Heavy Duty Torque Converter vs Stock. Usually once a beefed up Heavy Duty unit is installed, your good to go for a very long time. Hope it was something simple, like a clogging filter and or fluid in need of service:)! Best, Smitty Share this post Link to post Share on other sites
lemeulc Report post Posted June 1, 2017 Thanks, Smitty. Taking the unit to a certified facility Wed. for this and a diagnosis on a stubborn "Service Engine Soon" code. Share this post Link to post Share on other sites
wildebill308 Report post Posted June 1, 2017 Let us know what they find. Bill Share this post Link to post Share on other sites
