genesoda Report post Posted September 13, 2017 I have a 2008 Monaco Diplomat with a Magnum Inverter. The ME Series Remote Control panel lights or LED read out do not work. Is there a way to test the panel before buying a new one. Share this post Link to post Share on other sites
manholt Report post Posted September 13, 2017 Have you checked your fuse. Location for your system is in your manual...if you don't have one, then go online with your model number. Mine has 3 fuses, 2 for each battery bank and one for light. Mine are located in my fuse panel below the driver side outside bay. Share this post Link to post Share on other sites
desertdeals69 Report post Posted September 13, 2017 Take the panel out and go to the inverter and use a short cable and see if the panel works. It could be a bad cable or connector. I had that happen with my Xantrex. Share this post Link to post Share on other sites
genesoda Report post Posted September 13, 2017 Thank you so much, these are both great ideas. Have a great day. Share this post Link to post Share on other sites
manholt Report post Posted September 13, 2017 Forgot to say, check the bulbs! There is also a separate ground wire for the panel, has a nasty habit of being overlooked. Share this post Link to post Share on other sites
