fuserv2017 Report post Posted October 5, 2017 We have a 2017 Winnebago Fuse on a Ford Transit Chassis. An issue just came up where there is a beeping alarm when the emergency brake is released. We have checked the slide out, awning and even the passenger swivel seat to make sure all are secured in place. The RV drives fine with no issues. The Brake light on the dash goes out when the brake is released so it doesn't seem to be a brake issue. Please advise any suggestions to this issue. Thanks. Greg Share this post Link to post Share on other sites
elkhartjim Report post Posted October 5, 2017 Jacks? Share this post Link to post Share on other sites
wolfe10 Report post Posted October 5, 2017 fuserv2017, Welcome to the FMCA Forum. Yes, either from your owners manual or from a call to Winnebago, determine what the other "defaults" are for the alarm AND how to troubleshoot them. Share this post Link to post Share on other sites
fuserv2017 Report post Posted October 5, 2017 Thanks - there are no jacks. I called Winnebago and they referred me to Ford. I am taking it in to a dealership tomorrow but wanted to see if any other ideas. Share this post Link to post Share on other sites
fuserv2017 Report post Posted October 8, 2017 Took the RV to a Ford dealership and they found the issue. There are contacts under the passenger seat with a Honeywell alarm system. When the emergency brake is released the alarm will sound if the contacts are too far apart. One contact is screwed into place while the other is attached with velcro. The contacts can be easily pushed closer together if they have separated due to vibration or swiveling the seat. I will contact Winnebago about a better solution but at least the source is known. Hope this helps anyone else with a similar problem. Thanks for the suggestions. Greg Share this post Link to post Share on other sites
wolfe10 Report post Posted October 8, 2017 Thanks for the update. If you happen to have a picture of it, that would be great. Share this post Link to post Share on other sites
wildebill308 Report post Posted October 8, 2017 Thanks for the feedback. One more thing that will make you wonder "why would you do that". Bill Share this post Link to post Share on other sites
