Jump to content
Sign in to follow this  
desertdeals69

01 Silverado 1500 4X4

Recommended Posts

How do you shift into neutral with the push button 2/4 wheel drive which is on the dash?  I read the manual and it says for RV towing shift transfer case into neutral and put it in park.

Share this post


Link to post
Share on other sites

Bruce, 

Set the Parking brake, start the engine, put the vehicle in neutral, put your foot on the brake pedal and then hold the 2 and 4H buttons down at the same time. It can take up to 15 seconds and the Red neutral light will come on. I would always then put it in drive and release the brake. I would then race the engine to make sure the vehicle is in neutral. Then put the transmission in Park, turn off the engine, release the Parking Brake, remove the key and lock the doors. If I am not mistaken the 01 doesn't have a steering wheel locking pin.

Of course this is with the understanding that you have the vehicle hooked up to the RV.:D

Herman

Share this post


Link to post
Share on other sites

I had a 2001, Toyota Tundra 4x4, same sequence as the Silverado!

I know, Toyota?  Silverado?  Same engine & transmission! :P

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...