murphski1949 Report post Posted April 17, 2019 I have a 2015 Thor Tuscany and trying to find out the average settings on a ME-RC 50 remote. I'm not sure what to set the low battery and charge rate. Can any body help, I'm confused after reading the manuals. Share this post Link to post Share on other sites
dickandlois Report post Posted April 17, 2019 43 minutes ago, murphski1949 said: I have a 2015 Thor Tuscany and trying to find out the average settings on a ME-RC 50 remote. I'm not sure what to set the low battery and charge rate. Can any body help, I'm confused after reading the manuals. Welcome to the FMCA Forum ! The First item needed is the total Amp Hrs. of you coach batteries, most common number is 4 - 6 volts connected in to 2 sets of 12 volts - that are charged at a charging current equal to the total AH rating of the battery bank. Then the members can offer some help full information. Rich. Share this post Link to post Share on other sites
wolfe10 Report post Posted April 18, 2019 murphski1949, Welcome to the FMCA Forum. Please walk us through the questions and we can help with answer (after asking you question that may be easier to understand). Here are standard questions for most smart inverter/chargers-- order may be different than yours: Battery bank size in amp-hrs @ 12 VDC. Battery technology (wet cell, AGM, or gel) Ambient temperature (unless remote temperature probe is fit) Power save/power share to allow you to reduce the amps of 120 VAC used for battery charging if on limited shore power (like plugged into a house 15 amp outlet). Let us know what questions you have. Share this post Link to post Share on other sites
huffypuff Report post Posted April 18, 2019 This is a example of the settings of my ME-RC 50 Shore Max: 30 AMP Yes I have 50 AMPS but this seems to be the default Search Watts: 5W This should be set to the minimum to turn on inverter from standby Battery Amp Hr: 400 amps In my case I have four 6 volts x 110 amps each = about 400 amp hr Battery type: Flooded There is an online manual if you need more help. Share this post Link to post Share on other sites
elkhartjim Report post Posted April 18, 2019 If you want to take the easy way out, call Magnum and they will patiently step you through the setup. Magnum tech support: 425-353-8833 Share this post Link to post Share on other sites
huffypuff Report post Posted April 18, 2019 If your having trouble be sure to check temperature. By pressing the tech button can check battery and two inverter internal temperature. Share this post Link to post Share on other sites