DonDuddy Report post Posted May 4, 2019 Just acquired a Monaco Dynasty 34 footer in great condition. The leveling jacks do not want to deploy from up position! Motor is diesel, Workhorse base, Air brake on and pressure up, trans in neutral, ignition on, orange light on control switch stays on. Switches have been checked for power and relay to second contacts. Instruction book shows controller module with 6 amp fuse, but does not say where it is. Can jump the pump motor and it works. What am i missing? Any suggestions would be appreciated. Called Manufacturer and heard recording of them being closed and in the process of new owner. Please Help. Don Do you think i need to remove the dash assembly? Share this post Link to post Share on other sites
wolfe10 Report post Posted May 4, 2019 DonDuddy, Welcome to the FMCA forum. Please check again for your chassis, VERY unlikely to be Workhorse. Also, what brand jacks do you have? Model? Share this post Link to post Share on other sites
hermanmullins Report post Posted May 4, 2019 Don, There should be a fuse panel on drivers side in front of the front tire. You should be able to find the fuse there. Herman Share this post Link to post Share on other sites
DonDuddy Report post Posted May 4, 2019 3 hours ago, hermanmullins said: Don, There should be a fuse panel on drivers side in front of the front tire. You should be able to find the fuse there. Herman Hello Herman, yes there is a relay there. but not the 6 amp. Thanks for the Help, Don Share this post Link to post Share on other sites
DonDuddy Report post Posted May 4, 2019 16 hours ago, wolfe10 said: DonDuddy, Welcome to the FMCA forum. Please check again for your chassis, VERY unlikely to be Workhorse. Also, what brand jacks do you have? Model? Hello Wolfe10, I will check and post answer to your question. Don Share this post Link to post Share on other sites
