nursepat3737 Report post Posted July 10, 2019 Hi, I just purchased a 2018 Dynamax Isata4 . I had it professionally inspected before I bought it. Everything was working. I drove it about 800 miles home. I haven't moved it in a month since I got home, but have been in it showing it off ! I have put the slides in and out a few times and they worked fine. I have a trip coming up this weekend, so I went out to start stocking it and the slides won't work... It has a red blinking light on the panel that says Faulty code. My auto leveling jacks won't go down. Engine is on, brake is on and it's hooked up to shore power. Any help would be appreciated ! Thanks ! Share this post Link to post Share on other sites
huffypuff Report post Posted July 10, 2019 Read your owners manual. Each manufactures slideouts operate different. Mine is supposed to have full air suspension and the engine not running. It can be plugged into shore power or running generator to give it more ump. Share this post Link to post Share on other sites
f433921 Report post Posted July 10, 2019 9 minutes ago, huffypuff said: Read your owners manual. Each manufactures slideouts operate different. Mine is supposed to have full air suspension and the engine not running. It can be plugged into shore power or running generator to give it more ump. Huff, Thanks for reply, I'm sure that I close the slides while still connected to shore power, but normally start engine to fill suspension after closing slide. If I start engine before retracting slides it will retract jacks when starting engine and coach will usually become unlevel and have difficulty closing slides that are traveling in uphill position. Jim Share this post Link to post Share on other sites
