dutch Report post Posted July 14, 2019 Is there a way to remove moisture from inside the headlamp or is there an auto replacement for that unit? Saw a formum several years ago where this subject was discussed on a different year coach. Share this post Link to post Share on other sites
wolfe10 Report post Posted July 14, 2019 Dutch, Welcome to the FMCA Forum. Do you have a replaceable bulb accessible from the back of the headlight assembly? If so, remove the bulb and use a hair dryer to dry out the assembly. Do not overheat the plastic doing this. Share this post Link to post Share on other sites
huffypuff Report post Posted July 14, 2019 More likely the headlamp will have a TYC number on it and with that you can get a replacement. Share this post Link to post Share on other sites
rayin Report post Posted July 18, 2019 Removing the water is the end problem, preventing water from entering is the root problem. I have heard of drilling a 1/16" hole in the lowest point of the headlamp reflector assy, draining the water, removing the bulb, and allowing it to dry for a few days (covered from any water source) then using sealant to seal the hole. I've never attempted that, as I've never had the problem. Share this post Link to post Share on other sites
