bandshell Report post Posted June 26, 2022 Good Day everyone, We have a 2002 Holiday Rambler Endeavor, PBD. It has the corner shower with valves mounted in the corner. that corner behind that corner is an exterior wall and a kitchen slide wall. Neither allows any access to the backside of the shower control valve. Has anyone dealt with this issue? Or is the only way to replace the valves require removing the shower stall? Thank you Serge Share this post Link to post Share on other sites
rls7201 Report post Posted June 27, 2022 If memory serves me correctly, open the slide and cut an opening on the wall behind the slide. Or something like that. Probable a HR or Monaco forum will have a spot on answer. Richard Share this post Link to post Share on other sites
jleamont Report post Posted June 30, 2022 Serge, on our 02 HR, there is a mirror on the backside wall (kitchen in ours) that is removable, huge hole behind that mirror for access. mirror on the right side of the photo, just past the counter Share this post Link to post Share on other sites
hermanmullins Report post Posted July 1, 2022 Have you tried to remove the cover plate to the valve? Most valves can be repaired from there. Herman Share this post Link to post Share on other sites
