klparker Report post Posted November 23, 2022 Have a 2001 Itasca horizon, diesel pusher. One of the air pressure gauges stopped working. Looked at tank and saw wiring cover was damaged. It was contained in L shape covering that protected 3 wires. Tried to loosen cover from tank and the connection and cover crumbled. Fittings consisted of nut and washer. Other than gauge not working, coach drove fine and no air brake problems. Do you think I should remove the wires from the tank in order to repair or wrap the wires or try to keep them connected and repair. Enclosing photo Thanks Keith Parker Share this post Link to post Share on other sites
wildebill308 Report post Posted November 23, 2022 I would fix the gage. Bill Share this post Link to post Share on other sites
rayin Report post Posted November 24, 2022 Yep, replace the non-working air pressure sensor, the new one should have a wiring harness if there is a plug somewhere near the sensor. Owning and maintaining a MH is a "pay now, or pay later" issue. Share this post Link to post Share on other sites
