joseph.mozer Report post Posted December 4, 2022 i can't fid a part # FOR MY 2011 HOLIDAYRAMBLER ENDEAVOR 43PQT Share this post Link to post Share on other sites
dons2346 Report post Posted December 4, 2022 Welcome to the forum. If you can, remove the old seal and visit your local auto parts house and say "I need one of these". You might even go to a heavy truck supply house as there is really nothing different between a motorhome and a heavy truck Share this post Link to post Share on other sites
rayin Report post Posted December 4, 2022 14 hours ago, dons2346 said: Welcome to the forum. If you can, remove the old seal and visit your local auto parts house and say "I need one of these". You might even go to a heavy truck supply house as there is really nothing different between a motorhome and a heavy truck Exactly! If a MH mfgr. had every part special-made the MH would be outrageously expensive. Even Prevost is a bus chassis. Joe, you just need to know who made your chassis, but the numbers on the seal is the correct ID for any parts store. Share this post Link to post Share on other sites
wildebill308 Report post Posted December 4, 2022 Doesn't it have whet hubs? Who made the hubs? Bill Share this post Link to post Share on other sites
