Jump to content
Sign in to follow this  
lewengel

Freightliner Chassis Electrical Drawing

Recommended Posts

Corrosion strikes again. Found some minor corrosion on the start relay terminals, once I found the relay. It would energize when I turned the key to start but it would take up to 5 seconds before the starter would kick in. All OK now. This is the first I have found corrosion causing a delay in the passage of current. Usually it is all or none.

Share this post


Link to post
Share on other sites

Please tell me where you found the ignition relay box on the Freightliner CCC, I am broke down and get not power to the chassis. My batterys are fully charged and reading 12.9+ volts. I feel it must be a relay or circuit breaker in the ignition circuit.

Share this post


Link to post
Share on other sites

rlbarklevii,

The relay if often located near the starter and the location can very from model to model.

Reading your other post. I think you lost a ground, you mentioned all the fuses you could find where good.

Rich.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×
×
  • Create New...