BlueMonaco Report post Posted November 13, 2013 (edited) I recently acquired an 87 (I think or 86) Monaco. Interior is fabulous been working on various items with good success. However i cannot figure out how the jacks work. There are 3 knobs and a white push button in the middle. 1 of the orange lights up, but nothing. Do not hear any hydraulics running and the only panel I can find is on the floor next to the driver’s seat. Checked the wiring to the pump it seems not to be corroded or in working order. There is only 1 page in the binder manual with little information on up & down? Any Ideas? Thank you for the info, not my jacks however... 3 knobs for the 3 jacks 1 in front and 2 back, it says Diplomat Anaheim like they built them or nameplated by them. Do not see my panel in any of the diagrams on the website you provided. i will get a picture of the panel and post. Blue Monaco. Edited November 20, 2013 by BlueMonaco Share this post Link to post Share on other sites
rlbarkleyii Report post Posted November 13, 2013 If the hydraulics is HWH, their site <http://www.hwhcorp.com/contactus3.html> is very helpful, lots of schematics, parts, and other help. However they are impossible to reach on phone. Phone: (563)724-3396 or (800)321-3494Fax: (563)724-3408 Share this post Link to post Share on other sites
BlueMonaco Report post Posted November 20, 2013 Thank you did not match any diagrams, I appreciate your reply. Share this post Link to post Share on other sites
wildebill308 Report post Posted November 20, 2013 Try with the engine running in park or neutral with the parking brake set. Bill Share this post Link to post Share on other sites
