rsbilledwards Report post Posted July 21, 2014 Has anyone had them replaced or done it themselves? Share this post Link to post Share on other sites
michaelhillhouse Report post Posted July 21, 2014 I had the bottom slide seal on my 99 Zanzibar replaced and it was done when the basement compartments were out due to a wreck. That is the only way to access them properly. The top seals are another problem area and can be accessed with the slide out and working underneath the top of the slide between the slide and the body. Good Luck Share this post Link to post Share on other sites
dickandlois Report post Posted July 21, 2014 rsbilledwards, The one can replace the seals. The trick is to use some soppy water the make them slide into the grove where the old ones where removed. Think the trickiest part is finding the proper sized seals, as the seals that look alike; but very slightly in size. Rich. Share this post Link to post Share on other sites
