bjeff Report post Posted July 22, 2014 I need to replace the rear wheel well liners on my Monaco Dynasty. Can anyone tell me where I can purchase them or the plastic liner material so I can make my own? Thanks in advance. Share this post Link to post Share on other sites
dickandlois Report post Posted July 23, 2014 bjeff, have you tried this? if not give it a go. See if something looks like it would work. If not let the group know. https://www.google.com/#q=rv+wheel+well+liners Rich. Share this post Link to post Share on other sites
hermanmullins Report post Posted July 23, 2014 bjeff, I got my liners from Monaco. If I remember correctly they were not very expensive. However you need to remove the wheels to be able to drill the holes in them. I had to have the wheels balanced so I took the coach to a friends shop and when they pulled the wheels I mounted the shield. It took about 10 minutes per side. Herman Share this post Link to post Share on other sites
dickandlois Report post Posted July 23, 2014 bjeff, Took some time to look around for some information and did find this link. It might be a start, not allot of information on dual wheel well liners. Will add items as time allows !!!! http://www.buyersproducts.com/Mudflaps-Splash-Guards-Fenders/Fenders/Poly-Fender-fits-minimum-195-dual-rear-wheels/4879/ http://www.raneystruckparts.com/semi-truck-poly-fenders-black-for-19-5-dual-rear-wheels-single-axle/ http://www.raneystruckparts.com/semi-truck-poly-fenders-black-22-5-or-24-5-rear-wheels-single-axle/ Rich. Share this post Link to post Share on other sites
bjeff Report post Posted July 23, 2014 Thanks Rich and Herman. I'll contact Monaco first. My liners are still intact so I should be able to use them as a guide to drill the holes to reattach. Thanks again. Share this post Link to post Share on other sites
