manholt Report post Posted October 24, 2014 This started about 2 weeks ago and now has gotten worse. When I turn a light on/off or raise/lower my window shades/blinds, all pads flash white 4 times and the pad that I touched stay at blue as it should. The blinking does not prevent me from getting what I want. All fusses are good and so is breaker, it only happens when I'm on 50 amp shore power, not with Generator. Any ideas would be appreciated. Share this post Link to post Share on other sites
kaypsmith Report post Posted October 24, 2014 Have you checked on another cg 50 amp? I would first try another 50 amp service, if that isn't the problem, start verifying all grounding before and after entry to coach. Could be as simple as a loose ground lug somewhere. Good luck chasing it! Share this post Link to post Share on other sites
manholt Report post Posted October 25, 2014 This is my 5th campground in the past 2 weeks. Wow, chasing down a loss ground is going to be so much fun! LOL...but it makes sense, thanks. Carl C. Share this post Link to post Share on other sites
manholt Report post Posted October 27, 2014 Up date: Per AMC Tech. there is a plug under a removable cover, under bed that you un-plug and wait about 10 seconds ( it resets the computer board) then re-plug. It worked. No more blinking lights! Problem solved... Isn't high tech wonderful? Carl C. 10' AMC Tradition 45' Share this post Link to post Share on other sites
