BearAndMoon Report post Posted July 14, 2015 I have about 12 sq.ft. of engineered wood floor to glue down. I noticed that when I pulled up the Pergo style flooring from the galley, hall, and bathroom, the manufacturers had used what look like Liquid nails to hold it down. Anyone see a problem using it in so small an area? I sure hate to pay for something and have 90% of it left after the job when I have two good tubes of Liquid Nails already.... Share this post Link to post Share on other sites
wigginsjsr Report post Posted July 14, 2015 It has been my limited experience that if you use Liquid Nails you better be sure to don't ever intend to take it out! It makes a really strong bond. Share this post Link to post Share on other sites
Lenp Report post Posted July 14, 2015 Is this laminate flooring your taking up and replacing? I thought laminate flooring was a "floating" floor meaning it was not glued or nailed down. This allows it to expand and contract as needed with temperature changes. Lenp Share this post Link to post Share on other sites
erniee Report post Posted July 14, 2015 Go to Home Dept and get a gallon of urethane adhesive by Roberts. Use the proper trowel and butter the back of the engineered wood, after you have dry fit/cut them Share this post Link to post Share on other sites
