scottcampbell Report post Posted September 16, 2015 Norfold 1200 refer section has been operating fine since 2004. Now it starts out at 40 degs in the AM and climbs to 50-55 degs during the PM. Replaced thermal senser, installed fan system next to upper fins, checked for obstruction in the flue area, installed new senser 2ND fin, and made sure of current upgrades (recalls). Freezer is -9 to +5 degs. (Happly zone) Same for both electric and gas modes. OS temp is in the 80's, 60'so at night. Coach side is in the shade most of the day. Checked Norcold pdf manual... Help! Share this post Link to post Share on other sites
jleamont Report post Posted September 17, 2015 scottcampbell, are you connected to electric or are you running on gas? Share this post Link to post Share on other sites
huffypuff Report post Posted September 17, 2015 Make sure the insulation is closed up with long wire ties where the dealer installed the sensor of the recall kit. The dealer left mine cracked open and that knocked down performance. I used the wire ties to close back up and now performance is great. Share this post Link to post Share on other sites
