kaypsmith Report post Posted January 2, 2016 I think this is a great post, thanks for sharing. Kay Share this post Link to post Share on other sites
tbutler Report post Posted January 2, 2016 Great idea, great article. Additional insulation could also help reduce the interior noise level but I don't know if it would be significant. Have you noticed any reduction in the noise level in the coach when you are traveling? Share this post Link to post Share on other sites
rsbilledwards Report post Posted January 2, 2016 It is quieter and should be more so when the front section is finished between and above the front wheel wells. I found the floor where the steering assembly perforates the floor was a big culprit for admitting noise and cold. The hole in the floor assembly was nearly 12 inches square with an aluminum sheet over it, the rubber boot, and a layer of carpet. This is not much for reducing either noise or cold. I packed 2 inches of foil faced foam into this area. It took a little time to shape it so as to allow minimum clearance around the shaft and universals. Another area that is quieter is the bedroom. The engine drone is definitely softer. B Share this post Link to post Share on other sites
