JMarske Report post Posted August 21, 2016 We had new Allure vinyl hardwood installed in our 2008 Discovery Fleetwood . The installer had to install rollers so the floor would not get damaged but in doing so this is what we ended up with. My question is this normal for the slide out floor not to drop back down into the channel and sit flush? Share this post Link to post Share on other sites
wheels Report post Posted August 21, 2016 No it is not normal something is out of adjustment . Share this post Link to post Share on other sites
BillAdams Report post Posted August 21, 2016 No, that is not normal. It sounds like the rollers are preventing the slide from getting settled into its base. Either the rollers are not set correctly or the installer did not know what they were doing. JMHO....... Share this post Link to post Share on other sites
manholt Report post Posted August 22, 2016 Agree...that's just plain bad! I would not be a happy camper...who did this? Share this post Link to post Share on other sites
erniee Report post Posted August 22, 2016 This installer NEVER messes with how the slide moves. I work around how the factory manufactured it Share this post Link to post Share on other sites
lmsooter Report post Posted August 22, 2016 Extremely bad job. I would not be happy!!!! Share this post Link to post Share on other sites
JMarske Report post Posted August 22, 2016 Erinee, The installer stated he had to install rollers because Fleetwood designed the slide out to slide on carpet and he had to install rollers so it wouldn't tear up the floor. That's why I wanted to know if this was normal. Share this post Link to post Share on other sites
erniee Report post Posted August 23, 2016 Not normal - I give folks pieces of luxury vinyl planks to lay on main floor and where the slide comes in thus preventing any damage. Do this and get rid of those rollers that installer put on. Share this post Link to post Share on other sites
