one.click.away Report post Posted August 23, 2019 I own a 2006 Fleetwood revolution LE with hydraulic leveling jacks. When i park my RV I manually level the RV, when I go to leave the park I pull in my slides and I start the engine then for some reason unknown to me the jacks automatically retraced. This should not happen until I push the button to retract all jacks. Has anybody had this problem if so please help me. Share this post Link to post Share on other sites
desertdeals69 Report post Posted August 24, 2019 Has it done this all the time? It might be wired that way so you don't drive away with the jacks down. Share this post Link to post Share on other sites
one.click.away Report post Posted August 24, 2019 no, In 9 years it has never done this. Something new to deal with. we have always started the engine brought in the slides and then pushed that jack on button then the retract all jacks. Now if you forget to do the jacks and you put the transmission in gear or take the emergence brake off then sirens go off and you know you forgot something. Share this post Link to post Share on other sites
wayne77590 Report post Posted August 25, 2019 My WInnebago is programmed that way. Not with just the engine running but engine running and/or emergency brake off or in gear and the jacks will retract. It's a safety issue. Share this post Link to post Share on other sites
rayin Report post Posted August 26, 2019 On 8/24/2019 at 8:35 PM, wayne77590 said: My WInnebago is programmed that way. Not with just the engine running but engine running and/or emergency brake off or in gear and the jacks will retract. It's a safety issue. Mine acts the same. one click, how does it act when you select automatic leveling? Share this post Link to post Share on other sites
manholt Report post Posted August 27, 2019 Ditto on mine! Share this post Link to post Share on other sites
one.click.away Report post Posted August 29, 2019 Thanks for your input. I talked to american coach and to spartan then to a retired american coach tech. Here's my problem, the relay cube needed to be replaced, this is located in the fuse box under the drivers seat(in the basement). There are 3 fuse cubes and one needed to be replaced and now after 4 days of phone calls and trying different things we are good to go. Share this post Link to post Share on other sites