Jump to content

Recommended Posts

I tried out the CLEAR2O® RV AND MARINE INLINE WATER FILTER - CRV2006 and was suppried when I found grayish water in my toilet. Checking my water filter it was coated with charcoal, threw it away and took off the Clear20RV filter flushed my system and finally got back to clear water. Just wonder if anyone else had an issue with this filter? Contacted the company and they were no help, offered to send them the filter and never heard from them again.

Share this post


Link to post
Share on other sites

renglish, Welcome to the FMCA Forums! 

I use a much older version of this unit;

https://www.amazon.com/Camco-40630-Evo-Water-Filter/dp/B012GHM3GS/ref=zg_bs_10806177011_34?_encoding=UTF8&psc=1&refRID=WZQ7QH35YDT1M39CYZB1

I have used charcoal filters in the past and I have never experienced that issue before. I have had them clog and water pressure dramatically reduced. How old or long was the filter in service? 

 

Share this post


Link to post
Share on other sites

Welcome!

All charcoal filters that I know of, need to soak in water first, then rinsed until clear water comes out, then installed. I change them every 3 months!

Share this post


Link to post
Share on other sites

renglish,

As Carl said all charcoal filter need to be flushed before using. Most all the filter I have seen say to run 3 to 5 gallons of water through them when first installed. I have an old filter housing that I hook up my potable hose to and run 3 to 5 gallons of water through it. Then I will put the flushed out filter in my system.

I have a filter like the Clear2O Rv & Marine inline Water Filter CRV2006. When I want to filter water from the potable water hose, I will do the same by running water through to filter till it is clear. That is a must on any and all charcoal filters.

Good luck and let us hear from you again.

Herman 

Share this post


Link to post
Share on other sites
On 6/24/2020 at 1:12 PM, manholt said:

Welcome!

All charcoal filters that I know of, need to soak in water first, then rinsed until clear water comes out, then installed. I change them every 3 months!

I ran water through it until clear, have used the older blue less expensive filters with out a problem. This is a newer green more expensive filter which becomes really expensive if it wipes out other filters like your refrigerator water. 

Share this post


Link to post
Share on other sites

Excessive water pressure/flow rate can cause "tunneling", which is a breakthrough of the charcoal media. It washes out charcoal fines and fails to properly filter water for that point forward. Heed the water pressure limit on the container/label. ALL charcoal water filters have a maximum flow rate and pressure.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...