Flash7481 Report post Posted March 17, 2022 I have a 2000 mtn aire with no power to night lights and alarm. I found the fuse in the electric bay which was 1 amp. Would replacing the burned out bulbs (ordered) and adding a 3 amp fuse help? Thinking maybe they all need to work in order for it to power up? I’m lost as to what to do next. Share this post Link to post Share on other sites
rayin Report post Posted March 17, 2022 Without a detailed explanation of which specific lights and alarms, you cannot receive a point-on reply. None of your lights are daisy-chained, each light has it's own power source (+ and - wire), vs cheap Christmas tree lights that are wired in series where each bulb must test good for any to light. Share this post Link to post Share on other sites
wildebill308 Report post Posted March 17, 2022 3 hours ago, Flash7481 said: I have a 2000 mtn aire with no power to night lights and alarm. I found the fuse in the electric bay which was 1 amp. Would replacing the burned out bulbs (ordered) and adding a 3 amp fuse help? Thinking maybe they all need to work in order for it to power up? I’m lost as to what to do next. NEVER replace a fuse with anything but what is suppose to be installed. Clean and polish all the grounds and treat them with a corrosion preventative. Bill Share this post Link to post Share on other sites
dickandlois Report post Posted March 18, 2022 Flash 7381, Welcome to the FMCA Forum! You might try this link, https://newpar.newmarcorp.com/instance1Env99NEWMAR/html/images/2001MADPOG.pdf. It is a copy of the owners manuale .That might help you find what you need to find your issue ! With the LP detector. Rich. Share this post Link to post Share on other sites
Flash7481 Report post Posted March 21, 2022 Thanks all. The series is informative and I will check the manual too. Share this post Link to post Share on other sites
