Jlfulcherjr Report post Posted January 26 Atwood Water Heater works great on Gas but not on elect. No tripped CB, Cant find a reset button for elect anywhere. Could it just be the elect element bad...too old lay down in the closet to change element... Any other troubleshooting hints? for 2014 Discovery 40g. Share this post Link to post Share on other sites
wildebill308 Report post Posted January 26 Look and see if there is a fuse on the control board. Bill Share this post Link to post Share on other sites
rayin Report post Posted January 27 Atwood does not list a model GE16; here is the Atwood service manual: https://myrvworks.com/wp-content/uploads/2019/04/Atwood-Water-Heater-Service-Manual.pdf Share this post Link to post Share on other sites
rls7201 Report post Posted November 27 There is also a relay near the heating element that may have failed. Richard Share this post Link to post Share on other sites
chindog Report post Posted November 27 You might try unplugging and plugging the harness on the board quickly a number of times. That could remove some corrosion that might be preventing it from working properly. Share this post Link to post Share on other sites
