larryorth Report post Posted December 8, 2011 How do you replace the right rear stop light? The light cover has no screws. I have no idea how to get behind the body. Does the cover pop off and if so, how? Share this post Link to post Share on other sites
lmsooter Report post Posted December 8, 2011 Welcome to the FMCA forums. Please give us more information such as make, year and model of your coach. I am sure there is someone out there that who can help if they have that information. Share this post Link to post Share on other sites
theoldman Report post Posted December 11, 2011 I'm thinking it snaps on and off. try pushing up on the bottom close to the coach and pull up and out. Good luck Share this post Link to post Share on other sites
wolfe10 Report post Posted December 11, 2011 And ours is removed from inside the coach/back of the light receptacle. So, advice on what works on OUR coach may do damage to your coach. Brett Share this post Link to post Share on other sites
squeakkos Report post Posted December 28, 2011 Got a photo? Share this post Link to post Share on other sites
wdterry Report post Posted May 3, 2012 If the light appears to be mounted in a rubber grommet - it is. If the red lens is 4" across, the light is a standard truck light available at any truck service shop. The light is actually a sealed-beam unit - there is no bulb to replace in them - you buy a complete unit. It can be removed by gently prying the grommet out of the mounting hole. New LED versions are available - I just replaced my stop/signal lights with the LED units - for $12 each. They should last the lifetime of my Daybreak. Share this post Link to post Share on other sites
