geraldlanc Report post Posted September 24, 2014 The shower in our 2002 Beaver has a made in Italy curved front and door. The door rollers ride along a bar at the top that has a track in it and a hard plastic insert for the rollers to roll on. Recently, the plastic insert developed a crack that caused the door to "bump" as it hit that crack. It took both hands to close the door after that. I called a Beaver parts supplier and was told the plastic strip which is about 3 feet long and about 1/4 inch wide would be about $350!!! I said no thanks of course and went straight to a nearby Home Depot. In the back of the store in the door department I found a similar strip for $1.97 that was close to the O/E part and with a sharp tool and 5 minutes I was able to modify it to work as the original. Gerald Share this post Link to post Share on other sites
kaypsmith Report post Posted September 25, 2014 Way to go Gerald!!! Share this post Link to post Share on other sites
huffypuff Report post Posted September 25, 2014 2 thumbs up from me Gerald as I like ides that save us money and performs better. That reminds me instead of mounting my replacement TV's with expensive wall mounts and much modification to the cabinets I used 2 pieces of angle iron through the same screw mounting. Then I added Velcro strips to prevent it from rattling down the road. I saved over $200 and the TV's are more secured than using a wall mount. Share this post Link to post Share on other sites
dickandlois Report post Posted September 25, 2014 Gerald, by chance would you remember the part number for the plastic rail? or who made it? Rich. Share this post Link to post Share on other sites
geraldlanc Report post Posted September 25, 2014 Sorry, I don't know the part number, but I asked for help at the desk back where the doors are. I often see someone there staring at a computer, but after describing what I needed, he took me directly to the part. Gerald Share this post Link to post Share on other sites
executive45 Report post Posted September 26, 2014 A big thumbs up to you, Gerald....look at your receipt, it should have either the SKU or the UPC number on it.....Dennis Share this post Link to post Share on other sites
