skykingtcb Report post Posted February 23, 2018 Hello I am servicing my 2003 Monaco Diplomat Cummins 330hp Allison 3000 trans Tried searching previous topics but no luck. My wire to guage is not hooked up at trans cannot locate sender maybe was removed. Can anyone help me figure this out? Thank you Share this post Link to post Share on other sites
jleamont Report post Posted February 23, 2018 Skykingtcb, mine is on the cooler lines right after they exit the transmission for the gauge on the dash. How do you know its not hooked up? The reason I ask is the gauge on our Monaco doesn't rise until 140 degrees, but the scale is so close its hard to identify its actually working under normal temp range, it has to be really hot to even notice the gauge. Share this post Link to post Share on other sites
hermanmullins Report post Posted February 23, 2018 Skyking, by some chance to you have a Trip Tec in your coach. If so you can see the Engine as well as the Transmission temperatures there. I very seldom look at the gauge, I just keep tabs with the Trip Tec. Herman Share this post Link to post Share on other sites
skykingtcb Report post Posted February 23, 2018 Found it thank you. I will look into the trip tec not familiar Share this post Link to post Share on other sites
skykingtcb Report post Posted February 23, 2018 Herman Mullins can u steer me towards details in the trip tec Share this post Link to post Share on other sites
jleamont Report post Posted February 23, 2018 Cant speak to Hermans recommendation. I have one of these connected at all times providing me with a digital set of gauges. https://www.amazon.com/s/?ie=UTF8&keywords=scangauge+d&tag=hydsma-20&index=aps&hvadid=177593578550&hvpos=1t1&hvnetw=g&hvrand=6178622568250721435&hvpone=&hvptwo=&hvqmt=e&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9007343&hvtargid=kwd-48059789671&ref=pd_sl_70ti7s4b1i_e&gclid=CjwKCAiAlL_UBRBoEiwAXKgW5zzMa2nrXgcd9USHYgn72b0jP_1W28POXdm3HbF9nuZmSL5hrGjMQRoC9X4QAvD_BwE plus if I get any engine faults it will display those also. Share this post Link to post Share on other sites
manholt Report post Posted February 23, 2018 I have Silverleaf in mine, but it also gives me about 2 dozen readouts on what is going on in engine, cooling system, Allison, TPM's, mpg, exhaust system and turbo. Like Joe, it takes a time for my Allison temp to register, same with coolant. My readout is one degree increments, starting at 120. Share this post Link to post Share on other sites
dickandlois Report post Posted February 24, 2018 Like Carl, I use Silverleaf software to monitor a number of items in greater detail then the standard instrument panel. The software is free, it is the interface items on needs to purchase. The software runs on a standard laptop, although with an older operating system then windows 10. Settings are set to monitor 15 to 20 items in detail and log them for a detailed look any time I feel something is not quit right. Scan Gauge D is also a very helpful system, but somewhat less flexible and less expensive I'm not up to speed on the Trip Tech system. Rich. Share this post Link to post Share on other sites
