mikecollie Report post Posted October 26, 2018 Hi Guys its been a while sense i have posted but i do read comments just about daily.I have a new problem i hope you can help with.It is time for oil and filter change and i need a fuel bowl to go with my filter FS19738 by Fleetguard.I cannot find one on the internet for this filter.I have tried my local Cummins dealer with no luck so far.I have a 2000 Monaco Diplomat on a Roadmaster chassie with 315 hp 8.3 liter eng.serial number 45877542.Any help would be great.Thanks Share this post Link to post Share on other sites
dickandlois Report post Posted October 27, 2018 Mike, The Part number you listed is for the fuel system and is a fuel / water separator filter. Are you looking for a sight bowl that fits on the bottom of the filter / that has a drain valve to drain off valve for the water collected? Can you take a picture of the bowl and post it for the group? Rich. Mike does your filter have a part that looks like this? https://shop.moderngroup.com/3927023s-service-part-kit-fuel/?gclid=EAIaIQobChMIiae62cyl3gIV0rfACh0nkgHxEAQYAiABEgJWjfD_BwE Share this post Link to post Share on other sites
mikecollie Report post Posted October 27, 2018 yes it is a water fuel separator and i need the bowl with the drain on it. i cant take a picture with out taking the filter off. Share this post Link to post Share on other sites
dickandlois Report post Posted October 27, 2018 Does it look like this? Rich. Doc5.docx Doc5.pdf Share this post Link to post Share on other sites
mikecollie Report post Posted October 27, 2018 yes but i do not know if it will fit my filter. Share this post Link to post Share on other sites
dickandlois Report post Posted October 27, 2018 15 minutes ago, mikecollie said: yes but i do not know if it will fit my filter. The Filter number is most likely different - because it needs to be threaded on the top and bottom. By chance do you know the filter number currently mounted on the engine ? I will continue to look for more info. Rich. Share this post Link to post Share on other sites
mikecollie Report post Posted October 27, 2018 fs19738 fleetguard Share this post Link to post Share on other sites
dickandlois Report post Posted October 27, 2018 Mike, This is what I have found. This filter is listed for Cummings engine. Will it cross to the FS-19738.? The OD and ID threads need to be the same. The link below offers more info then I attached. https://www.simplyfilter.com/fs1242b-fleetguard-fuel-water-separator-p/1ufs1242b.htm You have the 8.3 Cummings - So it is setup just a little different then my system. I get the sight bowls from Freightliner for mine. Not all the filters that cross index's come up with a matching filter design. Rich. Fleetguard Fuel Water Separator FS1242B List Price: $57.18 Product Code: 1UFS1242B Our Price: $47.65 (You Save 16.67 % ) Cross reference: FG Primary application: BALDWIN BF1321 BIG A 95431 BOMAG 31701061 CARQUEST 86431 CUMMINS 3355904 CHAMP LFF90011 FREIGHTLINER ABP32FRT01 HAMM 1236377 LIEBHERR 7381820 LUBERFINER LFF90013 RACOR B32001 RACOR S3201 Share this post Link to post Share on other sites
mikecollie Report post Posted October 27, 2018 Thanks for the info i will call them next week and see if they can match one to my filter size. Cummins has one that looks alot like that one but it will not fit.Maybe i need to call Roadmaster sense they built the chassis.I will post when i get it figured out. Thanks again. Share this post Link to post Share on other sites
manholt Report post Posted October 27, 2018 Roadmaster chassis is no more! Freightliner has a like roadmaster chassis. Share this post Link to post Share on other sites
f433921 Report post Posted October 27, 2018 The filter head (the part fastened to the chassis frame) should have a part number stamped in it. Once you find this number you should find out what other filters will fit. Jim Share this post Link to post Share on other sites
