gelsw Report post Posted April 6, 2019 Have 2 leaks in plumbing, both where a pvc connector cracked. No markings on connector but pic below. Hose is 1/2" F.I.P., what ever that is. Can not find anyplace that sells the connector, Menards has the hose. The brand on the hose is JB Products, their site no longer lists the hose. 2013 Thor Tuscany 42WX Can anyone help?? Gary Elswick shared a photo with you View photo You received this mail because Gary Elswick shared these photos with you. If you no longer wish to receive email notifications of shared photos, unsubscribe here. Get the Google Photos app Google LLC 1600 Amphitheatre Pkwy Mountain View, CA 94043 USA Share this post Link to post Share on other sites
rossboyer Report post Posted April 6, 2019 The hoses and the fittings look like standard adapter hoses used to install faucets or the tank on a toilet. The male male fitting between probably could be replaced with a brass nipple. You may need to put seals inside, but I the adapter hoses have a seals. Share this post Link to post Share on other sites
gelsw Report post Posted April 6, 2019 Wow thanks, finished typing, poured a drink and found your reply!! Share this post Link to post Share on other sites
manholt Report post Posted April 6, 2019 Flex hose & fitting... any hardware store, from Ace to Home depot & Lowe's has them...I replaced all my valves, fitting"s and ball valves with brass! Take your picture with you and if you need suggestions on DIY...they will tell you! Good luck! Share this post Link to post Share on other sites
kaypsmith Report post Posted April 7, 2019 4 hours ago, shortbus said: Hose is 1/2" F.I.P., what ever that is. Actually FIP means female iron pipe, and it is 1/2 inch pipe size. Yes almost any hardware or building supply has them, but 1/2 inch is used on kitchen or vanity plumbing. 3/4 is the size used on toilets. Share this post Link to post Share on other sites
wildebill308 Report post Posted April 7, 2019 shortbus, is there any big reason you need a hand removable connection right there? If not you can easily replace it with a brass connector. Bill Share this post Link to post Share on other sites
