Truenorth1 Report post Posted January 1, 2020 We have a diesel pusher which came with the standard black and gray water discharge hose and associated plumbing. I modified the system to accept a Flojet macerator pump, hose and fittings. As it currently stands, I can switch back to the conventional discharge hose in a matter of minutes. My macerator system is set up with a 1" hose and fittings. Problem is, the primary hose I use is about 20 feet in length and the extension hose is approx. 10 feet in length. Many of the RV Parks we visit, have the sewer pipe installed away from the water hook-up or electrical box. Our motorhome plumbing compartment is located midway along the coach, which means in many instances I have to join both hoses to reach the sewer. I would like to purchase a longer hose (about 50 feet), and would like to receive any suggestions on the best choice of hose to purchase, specifically, a 1" hose that will coil without having the strength of a gorilla to coil and store. I would prefer to keep the system with a 1" hose and avoid converting to 3/4". Thanks for your replies. Share this post Link to post Share on other sites
hermanmullins Report post Posted January 1, 2020 Truenorth1 Welcome to the Forum. I know what you mean. A lot of the new hoses are very good and strong but at the same time some are so tough it's lit trying to roll up Rebar. You might look at Landscape companies. They may have longer length 1" hoses, hope fully of a less tough material. Another place comes to mind might be W.W. Granger the industrial supply house. Good luck and again Welcome. Herman Share this post Link to post Share on other sites
manholt Report post Posted January 1, 2020 I got mine at Home Depot, 1", not HD so it's lite. Share this post Link to post Share on other sites
hermanmullins Report post Posted January 1, 2020 (edited) A bit off the subject, the one thing I find wrong with the light weight hose are the connections. They all seem to be made of light weight and very thin material. Drop it and it will dent and never seat again. However the heavier hose tend to have much better connections. But and a big but in cold weather they are like rolling up re-bar. Now off the soap box. Herman Edited January 1, 2020 by hermanmullins Share this post Link to post Share on other sites
manholt Report post Posted January 2, 2020 Herman. Now your signature makes sense again...did you past what Factor did for you? Share this post Link to post Share on other sites
hermanmullins Report post Posted January 2, 2020 No I went into my profile and deleted my old signature and rewrote it. Thanks, Herman Share this post Link to post Share on other sites
manholt Report post Posted January 2, 2020 How do you find club affiliation...SWG Chapter is no more! Therefore I'm not a ND anymore! Share this post Link to post Share on other sites
wildebill308 Report post Posted January 2, 2020 1 hour ago, manholt said: How do you find club affiliation...SWG Chapter is no more! Therefore I'm not a ND anymore! Carl, try going into signature delete that and save it. Bill Share this post Link to post Share on other sites
manholt Report post Posted January 2, 2020 Did not work! Switch over to Test. Share this post Link to post Share on other sites
hermanmullins Report post Posted January 2, 2020 Carl, to edit your signature try this. When on a topic go to the upper right corner of the page to your name. Click on the down arrow and a menu will come up. On the menu click on Account Sittings. When Account Setting come up go to the left side and click Signature. When your Signature comes up make your changes and Save. That is how I corrected my Signature. Herman Share this post Link to post Share on other sites
kaypsmith Report post Posted January 2, 2020 Back to subject, Have you thought about a swimming pool backwash hose? https://www.amazon.com/BISupply-Discharge-Hose-Flat-Backwash/dp/B07QN89S7T/ref=sr_1_7?keywords=1+inch+swimmingpool+hose+pipe&qid=1577982628&sr=8-7, you can buy barb fittings for each end. Share this post Link to post Share on other sites
