Polmex Report post Posted April 20, 2022 Can anyone tell me if interior lights on my alfa founder are controlled by fuses. My bathroom lite does not work. Led lights are good but light will not come on. All other lights work though? Share this post Link to post Share on other sites
hermanmullins Report post Posted April 20, 2022 All lights are protected by either a Fuse (12 volt) or Circuit Breaker (110 volt) or it may be in line with a GFI plug. Have you replaced the Bulb? Is it Fluorescent, Incandescent, or LED? Fluorescent= bulb or ballast. Incandescent= 12volt = Bulb or fuse, 110volt= circuit breaker or GFI Led= possibly in wrong (reverse it) Herman Share this post Link to post Share on other sites
Polmex Report post Posted April 20, 2022 It has led lights that look like circuit boards. I changed them with another fixture and they work Share this post Link to post Share on other sites
hermanmullins Report post Posted April 20, 2022 Is there 12 volts to the receptacle? If not then it's a fuse which can be anywhere. Herman Share this post Link to post Share on other sites
Polmex Report post Posted April 20, 2022 I will check for fuses. Thanks Share this post Link to post Share on other sites
wildebill308 Report post Posted April 21, 2022 10 hours ago, Polmex said: I will check for fuses. Thanks I would suggest keeping a record of what fuses control what lights as you test for future reference. Bill Share this post Link to post Share on other sites
rayin Report post Posted April 21, 2022 7 minutes ago, wildebill308 said: I would suggest keeping a record of what fuses control what lights as you test for future reference. Bill AWW Bill, that takes all the fun out of the hunt. Mine has labeled circuit breakers instead of fuses. Share this post Link to post Share on other sites
wayne77590 Report post Posted April 21, 2022 No one mentioned that it could be the light fixture itself. Pull lit down and check the back side wire connectors and meter it there for the proper voltage. typically one light fixture is not going to be the only fixture controlled by circuit breaker or fuse. they are typically wired as a one point control. Share this post Link to post Share on other sites
hermanmullins Report post Posted April 21, 2022 Good point Wayne. It would help if we knew what kind of Light it was, a fixture, Recessed, Incandescent, LED, 12 or 110 volt. Until we know this it is like trying to get a spider web off yourself. 😕 Herman Share this post Link to post Share on other sites
Polmex Report post Posted April 21, 2022 It was the light fixture after all. Fuses good,wiring good. Thanks for the help. Led light fixture Share this post Link to post Share on other sites
