murmanone Report post Posted July 16, 2014 Hi friends, I am looking for the part #'s for the front and rear calipers plus rotors on my 95' Safari/Sable. I have exhausted the Safari/Monaco avenues and the Eaton rear axle info on the plates attached to the rear. If anyone has the part #'s please respond or direct me to a source. Thanks, Murmanone Share this post Link to post Share on other sites
desertdeals69 Report post Posted July 16, 2014 A parts house that deals in truck parts would be able to help you. I found a parts store in Phoenix that found me the hubs and drums I needed for my spartan chassis/rockwell axle. Share this post Link to post Share on other sites
dickandlois Report post Posted July 17, 2014 Murmanone, Could you post the chassis manufacture for your coach? Rich. Share this post Link to post Share on other sites
murmanone Report post Posted July 18, 2014 Magnum Chassis from SMC (Safari Motor Coach) Share this post Link to post Share on other sites
wolfe10 Report post Posted July 18, 2014 Monaco Service still has records of a number of older Safari coaches. You might give them a call (this information is a couple of months old, but suggest you try it): Monaco Oregon Service Center. ORservice@monacorv.com. 91186 N. Coburg Industrial Way Coburg, OR 97408. Mon - Fri: 7:00am - 4:00pm PT. 877-466-6226 Share this post Link to post Share on other sites
murmanone Report post Posted July 30, 2014 I contacted ORservice@monacorv.com and they replied that the info for 95' Safari parts was sparse at best. They suggested I look for parts numbers on the calipers. There are casting numbers on the calipers, so I will forward that info to them. I don't have a good feeling about there interest in my problem. Thanks for the reply. Murmanone Share this post Link to post Share on other sites
jbrunson Report post Posted September 12, 2016 I have a 96 beaver Monterey... Magnum Blue Streak hydraulic over hydraulic disc brakes... google the number on the caliper and you will get several sources... they are Bendix Calipers with twin 4" pistons...driver and passenger sides are different part numbers... rebuilt, loaded (with pads) calipers are about $100 each... for a little more $$$, NAPA can have you one tomorrow morning on their delivery truck... Share this post Link to post Share on other sites