tsobersjr Report post Posted September 7, 2015 My 9100 A&E Power Awning material keeps winding up crooked and the arms do not retract all the way in. Is there a way to move the material so it is even on the roller ? Thanks! Tom Sobers Livingston NJ 2008 Winnebago Voyage 33V 2010 Smart Car 2005 Ford Escape Share this post Link to post Share on other sites
dickandlois Report post Posted September 7, 2015 Tom, Measure the distance of the front and rear of the roller from the coach wall. When extended.If one end is farther from the wall, the fabric will not roll up evenly.Might need to completely unroll the fabric and get it nice and square in relation to the roller! Good time to check the extended distance from the top of the coach to the roller are equal; at both ends.Also,you might check the ends of each arm to make sure there are no issues with the bearing mounts at the ends of the support arms.Twisted, cracked or damaged in some way.Rich. NOTE, if you do not have a long ruler, a piece of string with a mark on it from one end - compared to the other will get you a close measurement comparison. Share this post Link to post Share on other sites
tsobersjr Report post Posted September 8, 2015 Thank you Rich! Share this post Link to post Share on other sites
hermanmullins Report post Posted September 8, 2015 Tom, In additions to what Rich said check and lube all joints and piviot points. Herman Share this post Link to post Share on other sites
tsobersjr Report post Posted September 8, 2015 Thanks, Herman. Share this post Link to post Share on other sites
wayne77590 Report post Posted September 9, 2015 Especially lube all joints. If one is sticking because of lack of lube it will most definately cause the mis-roll. Share this post Link to post Share on other sites
wayneburgett Report post Posted September 13, 2015 I have a related question, and this is the closest post I can find to ask. Is it possible to replace just the alumaguard wrap/cover of an awning? I have searched until Google had no more places to look ;-). The situation is that we side-swiped a power pole while making a very sharp turn at an intersection into a single lane of traffic with on-coming traffic. I didn't think I touched the pole, but the alumaguard damage says I did. I am hoping to not replace the entire awning but just the alumaguard cover. Any help is greatly appreciated. Thanks Wayne 447252 Share this post Link to post Share on other sites
hermanmullins Report post Posted September 13, 2015 Wayne, You might try Rv salvage yards. They can be found by google. They may have just the size you need. Herman Share this post Link to post Share on other sites
manholt Report post Posted September 13, 2015 Wayne. Your lucky, that's not all you sideswiped! Have you talked to your Insurance? Is the damage such that you cant use the awning, or cosmetic? You might call Camping World and or Dealerships, people replace their awnings and they might have yours in a throw away pile. If yours is an 02' odds are to replace it. Do as Herman says first and go from there. Next time, take your half of the road into traffic...they will give you room, just like you do to a 18 wheeler. Dirty looks and a whole bunch off birds is a small price to pay! Carl Share this post Link to post Share on other sites