hsbsafety Report post Posted September 25, 2015 We are in the process of having the slide mechanism for the passenger front slide replaced for the 3rd time on our 2014 Winnebago Tour QD. Anyone else having this problem? Is it fixable? Share this post Link to post Share on other sites
wolfe10 Report post Posted September 25, 2015 hsbsafety, Welcome to the FMCA Forum. Please tell us in what way it is failing. Share this post Link to post Share on other sites
ultraglide Report post Posted September 25, 2015 hsbsafety, Welcome to FMCA. Do you have the Schwintech System on that slide? I have it on my 2014 Journey and have had to have it fixed once so far. What is it doing or not doing? Share this post Link to post Share on other sites
manholt Report post Posted September 25, 2015 hsbsafty Is your coach at the dealer? What is the slide doing or not doing? Have you contacted Winnebago? I had a 07' Winnebago Tour 40KD and my right slide kept hanging up in the out position, turned out to be a slide/floor match up problem. When I let the slide out it would drop about a 1/4" to low. Dealer adjusted slide & problem fixed (1 off 300 in 5 years). I just love W! Carl Share this post Link to post Share on other sites
five Report post Posted October 6, 2015 One post and gone?? Share this post Link to post Share on other sites
harleyfelix03@yahoo.com Report post Posted December 5, 2017 2013 Tour GD - Had to have motors & slide racks replaced with upgraded system on driver front slideout - luckily done under warranty. After upgrade back side of slide would not fully retract. Service facility contacted Winnebago to ask for help. Replaced controller, re-synchronized motors did not fix. After slide retraction stops, have to push button again to get slide to close last 1-1/2 inch. Share this post Link to post Share on other sites
hermanmullins Report post Posted December 5, 2017 Harley, Welcome to the Forum. Sounds to me like the rear slide has jumped a notch and may need to re-synchronized like you had done on the front. Check with W/B an see if there is another recall on the rear. Herman Share this post Link to post Share on other sites
