Jump to content
Sign in to follow this  
hsbsafety

Slide Issue Winnebago Tour

Recommended Posts

We are in the process of having the slide mechanism for the passenger front slide replaced for the 3rd time on our 2014 Winnebago Tour QD.

Anyone else having this problem? Is it fixable?

Share this post


Link to post
Share on other sites

hsbsafety,

Welcome to FMCA.

Do you have the Schwintech System on that slide? I have it on my 2014 Journey and have had to have it fixed once so far.

What is it doing or not doing?

Share this post


Link to post
Share on other sites

hsbsafty

Is your coach at the dealer? What is the slide doing or not doing? Have you contacted Winnebago?

I had a 07' Winnebago Tour 40KD and my right slide kept hanging up in the out position, turned out to be a slide/floor match up problem.

When I let the slide out it would drop about a 1/4" to low. Dealer adjusted slide & problem fixed (1 off 300 in 5 years). I just love W!

Carl

Share this post


Link to post
Share on other sites

2013 Tour GD - Had to have motors & slide racks replaced with upgraded system on driver front slideout - luckily done under warranty. After upgrade back side of slide would not fully retract. Service facility contacted Winnebago to ask for help. Replaced controller, re-synchronized motors did not fix.  After slide retraction stops, have to push button again to get slide to close last 1-1/2 inch.

Share this post


Link to post
Share on other sites

Harley,

Welcome to the Forum. Sounds to me like the rear slide has jumped a notch and may need to re-synchronized like you had done on the front. Check with W/B an see if there is another recall on the rear.

Herman

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×
×
  • Create New...