tom73

I have decided that I am not going to use this inverter for my RV due to having to bypass my surge protector and the potential of having 60VAC on the neutral. I am going to look for a better inverter.

And that is exactly what would happen if I plugged the inverter into the receptacle on the side of my trailer. The trailer does not care where the power comes from. HOWEVER, I may have stumbled onto what my problem is. Some inverters (ie the "less expensive" type) make 120V between the hot and neutral, but in all reality they make 60V on the hot and neutral iin reference to ground, meaning the only way for this inverter to power my trailer is to bypass the EMS. That is a potentially dangerous situation in my mind since there is 60VAC in reference with the ground. That would also explain why when there was a neutral/ground boning plug installed it put the inverter into an overload condition. I don't believe I want to use this in my RV even though it came out of another RV.

I am trying to use the inverter to power the trailer. I use my 30A power cord to plug into the inverter and attach to the side of the trailer just like the original power cord would.

Bill, I was not using the power pedestal for this. I was trying to get the inverter to power the trailer. Since my trailer is a 50A unit I made a 30A power cord to power the trailer. That cord works well on a pedestal or my generator, so I don't believe it is the problem. Like I said, I get about 88V from hot to ground and about 74V neutral to ground on the inverter.

Hey everyone, I recently acquired a 3500w inverter (Edecoa 3500) that I was thinking about using for some boon docking. I have 400ah of FLA batteries (for now) and hooked up the inverter. I plugged my trailer in and the surge protector (Progressive Industries 35550 hard wired) won't let the power go to the trailer. I checked the output of the inverter and here is where I run into an issue. Between hot and neutral I see 121.7vac, but from hot to ground I see 88vac, and neutral to ground I see 74vac. The surge protector won't allow the power to the RV because of the neutral-ground voltage I am guessing. Also, the inverter has a floating neutral, so I tried a neutral-ground bonding connection. That makes the inverter throw an overload alarm and no voltage is created, so, it appears that is not what the problem is. However, I have a 3600w inverter generator that has a floating neutral and with a neutral-ground bond it powers the RV just fine through the surge protector. I have tried emailing both Edecoa and Progressive Industries, but they don't seem to want to reply to me......

Sorry I'm late to this party, but I am one of those that used the FMCAssist. My late wife was diagnosed with liver cancer in early January 2022. We were in the Las Vegas area and wanted her to get back to our home area so she could at least see our three kids. Long story short, it was a BED TO BED transfer by the air ambulance crew. They came right to her room in Vegas, had a waiting ground ambulance to go to the airport, a ground ambulance to go from the Duluth MN airport to the next hospital, and right to her room. The crew were some of the most professional you could ever want. I NEVER saw any kind of a bill from them! The only problem I had was trying to coordinate through the hospital (that's a whole 'nother story). Once I started coordinating with them myself everything went quite smooth Tom

The first thing to look at is how level the trailer is when hooked up. Then the next thing is to see how much clearance you have between the truck bed and trailer. If you have 5 inches clearance you shouldn't have much problem, but more is better.

I may not be correct, but that sounds a lot like a groung problem. Look around the ECM for a bunch of wires going to ground and try cleaning the connection(s).

I would not recommend you cover the vent in your stairs. That would be the return air for your furnace.

Herman, that is strange. I called the number on the back of the ID card and GMMI was who answered. They even asked for my FMCA number. No, I have not seen any bill from them. It wasn't fun to get things arranged and then the hospital she was in tried to take credit for arranging everything. My word of advice is to not get sick in the Las Vegas area.......

No, my wife passed away on May 24th from the cancer. GMMI is the insurance company that answers the number that is given for the plan. No, I didn't contact Chubbs. I have no idea who that is.

I want to give my take on the FMCA Assist benefit and see if this is/was correct. Back in January my wife was diagnosed with liver cancer. Long story short, in April she is in a hospital in Las Vegas and going down hill rather quickly. I wanted to get her back to Duluth, MN so she would be near our kids and in familiar territory, so I called GMMI. First thing I was told was "Sure we can transport her". Next was "Well, now we need this paper (or something to that effect), then it was a go. No, now this other paper is needed so I supplied that. Next was "we'll give you an update withing two hours". 48 hours later I called (again) and was told some other paper was needed. After almost three full weeks my wife was finally flown home and due to our pets we decided I should bring the truck and trailer home. It was so frustrating that I even called the air ambulance company just for reassurance. I even got a phone call from the CEO of the air ambulance company about the headaches and hassle of trying to arrange the flight. They would NOT tranport for treatment, would NOT transport for possible life saving surgery, and would only tranport for palliative care or hospice care. I questioned why there would not be transport for care, surgery, etc. but they will tranport for a patient to die and was told "Well, it's policy". I will say, the air crew was the most proffesional and polite crew you could ever ask for. Tom

The tag really doesn't care what brand is on it. It's not like the steer that can cause safety issues with handling, not like a drive axle where you have one tire having slightly larger diameter or different diameters on each side. Both wheels on the tag freewheel and are not connected to each other or any other tire/wheel combination.

Wife and I are going to go out whale watching in Puget Sound on Tuesday the 21st. Not cheap, but it sure sounds like fun!

Could you do it yourself? That's what I would do.